Motorcycles are very convenient for transportation. Maintaining a motorcycle is not so difficult and its maintenance costs are lower than a four-wheeler. Also, motorcycles have several disadvantages. Understanding the most pervasive problems in motorcycles can help riders maintain their motorcycle and make the ride fun. Let’s talk about those common problems motorcyclists face often.
1. Engine problem
Engine problems are more common in higher cc motorcycles than lower cc motorcycles. Higher CC motorcycles require extra care and Problems start with lack of proper maintenance. When you pay attention to your motorcycle you will face problems like excess heat being generated, oil leaking, and tears. As a result of not changing the engine oil and coolant on time such problems are seen in all small and big engines. In the case of higher cc motorcycles the problems are more can be seen. To prevent these problems, change your engine oil on time (based on how many kilometers you have run your motorcycle), Check the coolant frequently, and change it as per its need. Avoid over-revving.
2. Tires and wheels problem
Tire and wheel problems in motorcycles are very common. Motorcycle tires often get punctured by debris left on the road. Just because the majority of tires are tubeless we don’t notice well or realize when the tire gets punctured and unknowingly we drive our motorcycle for long. In This case, there is a high chance of cutting or cracking the tire. Check your tire pressure regularly and check for punctures or other damages. It often happens that the tire is not properly attached to the rim resulting in the tire wearing before its lifespan. To prevent such problems, always try to take your motorcycle to an experienced mechanic. Wobbling occurs due to unbalanced tires, bent rims, and loose spokes. Fix the bent rims, and loose spokes and maintain the right tire pressure to prevent wobble.
3. Electrical components issues
Battery: When any fact arises about electrical problems, the battery comes first. The battery problems start when you keep the motorcycle lights on even after turning off the engine. For a bad charging system and an old battery, we face battery issues. To prevent these problems make sure the battery is charging properly, replace the battery when its lifespan is over, and keep the motorcycle lights off after turning off the engine.
Wires: You will face problems like not starting the motorcycle, sudden engine stopping, light flicks and the horn doesn’t sound right for loose, corroded, and damaged wires. Check the weirs carefully for wear, corrosion, or damage. Change or fix them if needed.
4. Brake problems
If there is a noise coming out after applying the brakes the brake lever has to be pulled too far and the motorcycle struggles to stop even after pressing the brake hard then normally you can assume that the brake pads are worn out. Check brake pads and rotors very well and replace them if needed. Brake levers feel spongy targets, air entering the brake lines, or fluid leaks. Make sure no air is entering the brake line and the brake fluid is at the correct level.
5. Chain and sprocket problems
When your motorcycle chain is loose the throttle is required to be pulled too low at the start of running the motorcycle and you also will understand the problem at the time of gear shifting. It reduces throttle response and also consumes more fuel. Always maintain the right tension of the chain. A worn-out chain causes poor performance and might damage other components. Take a closer look at the chain and chain sprocket if it wears out. Motorcycle chains are also very prone to rust. Lubricate your motorcycle chain frequently to prevent rust.
6. Air and fuel passing issues
Air Filter: For a clogged air filter the engine can not intake air properly. A dirty and clogged air filter restricts proper air-fuel mixing. As a result of which the engine heats up excessively and the sound of the engine changes. To prevent this problem Check your air filter every time you change the engine oil and change the air filter if needed.
Fuel filter: A clogged and damaged fuel filter reduces oil pressure and can not filter out the unnecessary substances from the oil properly. Due to fuel supply the engine overheats, stalls repeatedly, and fails to start. Using a bad fuel filter over a long period will damage the internal parts of your engine. Check the oil filter and change when needed.
7. Engine oil and filter issues
Many riders do not change their engine oil on time, do not put the right engine oil, and don’t change their oil filter on time. Engine oil lubes the inner parts of the engine, controls the friction, and maintains the engine temperature. Change your engine oil and put the right oil according to the user manual or your oil changing schedule. A clogged oil filter blocks the natural oil flow to the engine that is not enough to lubricate the engine resulting in increased friction engine particles causing overheating. There is no downtime to change the oil filter so change when required. The best practice is to change the oil filter every time you change the engine oil.
Like any complex machine, motorcycles require regular maintenance to function their best. By addressing this common problem and fixing it you can enjoy a safe and smooth ride.